Stage Plot Pro Serial Mac: How to Customize Your Stage Layout, Input List and Monitor Mixes

Leave on Dock: If you want to add several of the same 'instruments' to the stage, such as a monitor wedge or microphone, you may check 'Leave on Dock', and you will be able to add the 'instrument' to the stage repeatedly without having to go to the menubar each time.

Importing a Stage: Use Stagecraft>Stage>Import. Enter the desired width of your imported stage. Import a 72dpi image, large enough that is won't have to be enlarged, as it may blur somewhat. Reducing is fine. Choose whether you want your instruments scaled to the stage. If you do, any instruments that you bring onto it will be scaled (slightly smaller than if not), and the 'Scale to Stage' checkbox in the Preferences window will be checked for you, and un-checked when you close the file, unless it was checked before you imported the stage. If you wish to scale instruments that are already on a stage plot that you have made with StagePlotPro and are not scaled, select the instruments and use Edit>Scale to Stage.

Stage Plot Pro Serial Mac

Download File: https://imepxtahi.blogspot.com/?file=2vFdhW

Creating a Stage: Use Stagecraft>Stage>Create. You will be limited to four straight sides. Enter the width and depth of the stage you wish to create, and how you would like it to be aligned in the window-centered at the top, or in the middle. You will save it, if you wish, just as you would an imported stage, and it will be available in the menu.

Selecting/Positioning/Aligning: Select an instrument by double-clicking on it, Shift+Clicking on it, or select several instruments at once by holding the shift key while drawing a selection box around them. This is reccomended for Text, as it can be difficult to click exactly on a part of a letter. Select all using Edit>Select All. Deselect a single instrument by double-clicking on it, Shift+Clicking on it, or deselect all by clicking on an empty area of the stage, or use Edit>Deselect All.

You may wish to resize the stage after you have positioned instruments on it. Normally, an instrument's distance from the left side or top of the stage are not affected by resizing. If you wish to have an instrument's position remain the same distance from the right side of the stage after resizing, select the instrument and choose Edit>Lock>Right. You may also choose the bottom edge the same way. If you want to spread instruments out as you resize, select them and use Edit>Lock>Horizontal, Edit>Lock>Vertical, or both. If you change the position of a locked instrument it will be locked in the new position. To unlock an instrument, select it and use Edit>Unlock> etc.

Rotating Instruments: You may rotate an instrument after it is on the stage by selecting it (alone) and choosing Edit>Rotate... Use the slider to rotate the instrument up to 180 degrees clockwise or counter-clockwise. Again, certain instruments are not available to rotate, and you must close the Rotate window in order to add more instruments to the stage.

Input List: The text you enter into the Input List Window (Window>Input List) will be written to the section beneath the stage. In the preferences window, you may specify whether you want to group 8 lines of text per block, 10 lines, or use up to 3 columns of text per block. These columns are useful to list mics to be used, inserts, etc. Column widths may be adjusted by clicking on the edge of the numbered heading above the text area and dragging left or right. A section of text in a column will be limited in length to the width of the column. Text will not wrap, nor will a word that extends beyond the width of a column print to the input list. Use tab to select the next column, and the up/down arrow keys to change rows. Use the radio buttons to set the number of columns, the sets of three small arrows to change the alignment of the text, the larger arrows to go to the next or previous block of text, and the 'Write to Page' button to write to each block, according to the number at the top of the Input List Window, 1 through 6.

Adding Curtains: Use Stagecraft>Curtain>Backdrop to add a curtain to the back of the stage. Once this is done, you can add wings and/or legs to the sides. You may adjust the position of the curtains by choosing Stagecraft>Curtain>Adjust and dragging the arrows that appear in their corners. If you have imported a stage, the backdrop, wings and legs will go to the back and sides of it. In this case, the curtains will stay in place through resizing of the window, but will not be adjustable.

Preferences: The Preferences Window (StagePlotPro>Preferences) allows you to select the way you display measurements, i.e. U.S. Customary, or Metric, and the way you wish to group the input list, as well as whether to show the stage size (see below). Grouping the input list by eight allows visual compatibility with many digital audio applications. Grouping it by ten will give you more lines to use. Sub-Columns are meant to line up text vertically, where you may want to specify or suggest a mic to use, an insert, etc.

Show Stage Size: The stage size may be displayed, if you wish, by checking the appropriate checkbox in the Preferences Window. You may choose to have the stage size displayed according to it's size on screen, where 18 pixels = 1 foot, or 59 pixels = 1 meter, or you may designate the size to be shown by checking 'Show as' in the Preferences Window, and entering measurements. If you have imported a stage, those measurements will be shown.These are document preferences, so you will have to use the Preferences Window for any stage plot you wish to display the stage size on.

Drawing on the Stage: Choose Window>Draw. To draw a straight line, click on the radio button labeled 'Line', and click and drag on the stage. To draw a strictly vertical or horizontal line, press Shift as you drag. Much the same with the other drawing tools - to draw a square, press Shift as you drag a rectangle, to draw a circle, press Shift as you drag an oval. You may choose any shade of grey, or black or white to fill a closed shape. To undo drawing, use Edit> Undo (Command-Z). Likewise, Edit>Redo to re-do. You may return to the Draw window at any point to undo drawing or to clear it.

Stagecraft: Add curtains to the stage by selecting Stagecraft>Curtain>Backdrop. At this point, you may also add wings, legs, or both. Move the curtains by choosing Stagecraft>Curtain>Adjust. Drag the white arrows with your mouse to bring the backdrop forward or back, or to bring the wings in or out. If you adjust the curtains, they will no longer resize as you resize the stage. To exit adjust mode, uncheck the menu by choosing Adjust again, hit "Enter" or "Return" on your keyboard, or click on an empty white space on the stage.

Risers: You may create risers to any dimensions you need. Choose Stagecraft>Risers and specify the width, depth and height of the riser you wish to use, whether you wish to display it's dimensions ('Include Dimensions' checkbox), press "Load", and it will appear at your cursor position over the stage. A small 'Choir' is available by checking 'Include Choir'.

Printing/Exporting: To print, use File>Print or Command+P. To export your stage plot as a JPEG or PDF file, choose File>Export and choose the format. If you print directly from StagePlotPro, and have expanded the stage/input list, your stage plot will be reduced to fit on a letter-size page.

You must have StagePlotPro in your Applications folder in order to Activate or Deactivate it. The on-line registration process has to communicate with it, so it must know where to find it, and you must have an active internet connection. COPY/PASTE your name and serial number, to avoid any problems.

Generate stage plots using various instruments and controlling their arrangement. Check, amend, copy and re-organize the input list and monitor mixes or stage layout. Integrate the plots with other stage management suites for complete environmental control.

StagePlotPro allows you to create professional, accurate, and easy-to-read stage plots for stage managers and sound engineers. Keep your stage layout, input list and monitor mixes all on one page to print or email as a JPEG. Finally, an application dedicated to creating stage plots for professionals.

Jan 17, 2020 Find the serial number printed on the underside of your Mac, near the regulatory markings. On previous Mac Pro models, the serial number is printed on the computer's back panel, below the video ports. It's also on the original packaging, next to a barcode label. You can then enter that serial number on the Check Coverage page to find your model. Stageplot pro 2.9.9 serial numbers are presented here. No registration. The access to our data base is fast and free, enjoy.

Stage Plot Pro Serial Number Macpacker 9f2d7f2b5e StagePlot Pro 2.9.1 Windows (FULL + Serial Key) 3, 2015 Full software with working serial key, StagePlot. Stage Plot Pro Serial Number Macpacker V5Ft. Look for the distinctive snow box with slanted corners (or 5-sided face when viewed from the front). Husqvarna also makes Poulan Pro.

Steam. Oyun platformları arasından belki de en aşina olduğunuz Steam'dir. 12 Eylül 2003 yılında kurulan Steam bugün 15 yıldır... Steam'de daha önce indirdiğiniz oyunları başka bir bilgisayara geçtiğiniz zaman defalarca kez indirmenize gerek yok. Tekrar tekrar indirmek yerine oyunlarınızı yedekleyip aktarım yapmanız. Bilgisayara oyun indirmek için en fazla tercih edilen yöntemler arasında çevrimiçi oyun platformları geliyor. Steam, çevrimiçi oyun platformları arasında en çok tercih edilenler arasında bulunuyor.... Çevrimiçi oyun platformlarının dışında internet siteleri üzerinden de bilgisayarınıza oyun indirebilirsiniz. Ancak burada. Serial Port Connector Pins and Signals (CN3). Stage plot pro mac serial number found at SmartSVN Foundation Free, SmartSVN Professional 50user. Stage Plot Pro Serial Number Macpacker 9f2d7f2b5e StagePlot Pro 2.9.1 Windows (FULL + Serial Key) 3, 2015 Full software with working. Macpacker 9f2d7f2b5e StagePlot Pro 2.9.1 Windows (FULL + Serial Key). 2ff7e9595c